FROR16 O.R. UNEL 300/500 V
Cables for fixed installations comply with the requirements of the Construction Products Regulation (CPR EU 305/11) and are designed to limit the generation and spread of fire and smoke.
Multi-core cables for energy, control, signal, command or measurement systems with oil-resistant outer jackets.
The non-propagating of fire (low-risk beam mounting) and small exterior dimensions make it particularly suitable for walkie-talkie, civil, industrial indoor and on-board machine applications.
The cable can always be installed in coexistence with 450/750V energy cables, in addition, it can also coexist with 0/0kV energy cables to power loads with a nominal voltage of 230/400V if used to power a Class 0 system (nominal voltage less than or equal to 50V, if AC, or 120V, if DC or non-corrugated current).
application
Cables for fixed installations comply with the requirements of the Construction Products Regulation (CPR EU 305/11) and are designed to limit the generation and spread of fire and smoke.
Multi-core cables for energy, control, signal, command or measurement systems with oil-resistant outer jackets.
The non-propagating of fire (low-risk beam mounting) and small exterior dimensions make it particularly suitable for walkie-talkie, civil, industrial indoor and on-board machine applications.
The cable can always be installed in coexistence with 450/750V energy cables, in addition, it can also coexist with 0/0kV energy cables to power loads with a nominal voltage of 230/400V if used to power a Class 0 system (nominal voltage less than or equal to 50V, if AC, or 120V, if DC or non-corrugated current).
All this does not rule out possible problems due to possible electromagnetic interference.
It can also be used for stress-free occasional mobile apps.
Underground installations (even if protected) and permanent outdoor installations (even if protected) are not allowed.
peculiarity
- CEI 20-29 IEC 60228
- CEI 20-11
- CEI EN 60332-3-24 Class C IEC 60332-3-24 Class C
- CEI UNEL 36762
- CEI EN 60811-404
ADDITIONAL INFORMATION
- Customizable core/sheath color
Product structure
| conductor | Bare copper wire complies with IEC 60228, VDE 0295, class 5 standards |
|---|---|
| insulation | PVC mixed material, R2 grade |
| color | CEI UNEL 00722 – 00725 (for HD 308 S2 – EN50334) |
| structure | Concentric layer stranded/bundle stranded conductors |
| Wrap the bag | not |
| shield | not |
| Sheath material: | PVC mixed material, R16 grade, oil resistance according to CEI EN 60811-404 |
| Sheath color | Grey (based on RAL 7035 colour card) |
Technical parameters
| Operating voltage | Section ≤ 0.75 mm²: 300/500V
Section ≥ 1.00 mm²: 450/750V |
|---|---|
| Test voltage | Section ≤ 0.75 mm²: 2000V
Section ≥ 1.00 mm²: 2500V |
| Temperature range | Minimum operating temperature
• Fixed laying: -25°C • Non-stressed temporary mobile laying: -5°C Maximum operating temperature • Fixed laying: +70°C • Non-stressed temporary mobile laying: +70°C Short-circuit maximum temperature +160°C |
| environmental protection | Comply with EU RoHS directive |
Cable parameters
| numbering | specification | The finished outer diameter is -ø | Max. Resistance (20° C) | |
|---|---|---|---|---|
| LS2380205 | 2 x 0.35 mm² | 1.8X3.7 mm | 247.0 ohm/km | Send an inquiry |
| LS2380305 | 2 x 0.5 mm² | 2.1X4.2 mm | 39.0 ohm/km | Send an inquiry |
| LS2380405 | 2 x 0.75 mm² | 2.3X4.6 mm | 26.0 ohm/km | Send an inquiry |
| LS2380505 | 2 x 1.0 mm² | 2.4X4.8 mm | 19.5 ohm/km | Send an inquiry |
| LS2380705 | 2 x 1.5 mm² | 2.9X5.8 mm | 13.3 ohm/km | Send an inquiry |
| LS2381205 | 2 x 2.5 mm² | 3.3X6.6 mm | 7.98 ohm/km | Send an inquiry |
Other sizes and colors are available upon request. The above data is for reference only and is subject to the actual product. Other sizes and colors are available upon request. The above data is for reference only and is subject to the actual product.
Recently viewed products
You have no recently viewed item.