LiYCY-DIN PRIME Cca 450/750 V
The SPA for the cable confirms the requirements of the Construction Products Regulation (EU CPR 305/11) and is designed to limit the generation and spread of fire and smoke.
Shielded cables are used for data transmission in electrical engineering and computers, for signaling, measurement, command and control systems, and in general, where effective protection from external electromagnetic interference and small size protection is required.
The cable can always be installed in coexistence with a 450/750V energy cable, in addition, it can also be installed in coexistence with a 0/1kV energy cable if used to power a Class 0 system (nominal voltage less than or equal to 50V, if AC, or 120V, if DC or non-corrugated), to provide a positive rated voltage of 300/400V for the load.
application
The SPA for the cable confirms the requirements of the Construction Products Regulation (EU CPR 305/11) and is designed to limit the generation and spread of fire and smoke.
Shielded cables are used for data transmission in electrical engineering and computers, for signaling, measurement, command and control systems, and in general, where effective protection from external electromagnetic interference and small size protection is required.
The cable can always be installed in coexistence with a 450/750V energy cable, in addition, it can also be installed in coexistence with a 0/1kV energy cable if used to power a Class 0 system (nominal voltage less than or equal to 50V, if AC, or 120V, if DC or non-corrugated), to provide a positive rated voltage of 300/400V for the load.
Underground installations (even if protected) and permanent outdoor installations (even if protected) are not allowed.
peculiarity
-
- IEC 60228
- IEC 60332-3-24 Class C
ADDITIONAL INFORMATION
- Custom core/jacket color
Product structure
| conductor | Bare copper wire complies with IEC 60228, VDE 0295, class 5 standards |
|---|---|
| insulation | Flame retardant PVC composite material (oxygen index ≥30%)
Insulation thickness tolerance: ±0.1mm |
| color | Compliant with DIN 47100 full chromatography |
| structure | Concentric stranded structure (knot-to-diameter ratio≤ 14×D)
Strangling direction: Alternating S/Z direction |
| Wrap the bag | Integral polyester strap wrap (thickness 0.05±0.01mm)
Overlap rate≥ 30% |
| shield | Tinned copper braided shielding (coverage≥80%)
Weaving angle: 45±5° |
| Sheath material: | Flame retardant PVC sheath (tested by IEC 60332-1)
The thinnest point of the sheath: nominal value× 90%+0.1mm |
| Sheath color | RAL 7001 Grey (ΔE≤3) |
Technical parameters
| Operating voltage | ≤0.75mm²：300/500V
≥1.00mm²：450/750V Outer sheath: 450/750V (full section) |
|---|---|
| Test voltage | ≤0.75mm²：2000V AC/5min
≥1.00mm²：2500V AC/5min |
| Temperature range | Operating temperature range
▸ Fixed laying: -25°C ~ +70°C ▸ Non-stressed temporary mobile laying: -5°C ~ +70°C Short-circuit tolerance limit ▸ Maximum instantaneous temperature: +160°C (duration ≤5 seconds) |
| environmental protection | Comply with EU RoHS directive |
Cable parameters
| numbering | specification | The finished outer diameter is -ø | Max. Resistance (20° C) | |
|---|---|---|---|---|
| LS2380205 | 2 x 0.35 mm² | 1.8X3.7 mm | 247.0 ohm/km | Send an inquiry |
| LS2380305 | 2 x 0.5 mm² | 2.1X4.2 mm | 39.0 ohm/km | Send an inquiry |
| LS2380405 | 2 x 0.75 mm² | 2.3X4.6 mm | 26.0 ohm/km | Send an inquiry |
| LS2380505 | 2 x 1.0 mm² | 2.4X4.8 mm | 19.5 ohm/km | Send an inquiry |
| LS2380705 | 2 x 1.5 mm² | 2.9X5.8 mm | 13.3 ohm/km | Send an inquiry |
| LS2381205 | 2 x 2.5 mm² | 3.3X6.6 mm | 7.98 ohm/km | Send an inquiry |
