LiYCY-TP-DIN Dca 450/750 V

application

This cable complies with the requirements of the Construction Products Regulation (CPR EU 305/11) and is designed to limit the generation and spread of smoke in fires.

This multi-pair integral shielded cable is suitable for:

Data transmission of electronic devices and computer systems
Signal transmission, measurement and control systems
Occasions that need to effectively resist external electromagnetic interference and require compact structure

Suitable installation environment:
✓ Dry or wet indoor locations
✓ Static or limited dynamic installation (non-continuous movement)
✓ Mechanically stress-free environments

Strictly prohibited:
✖ Underground laying (even if protective measures are taken) Permanently
✖ moving Occasions
✖ Environments where mechanical stress exists

peculiarity

- IEC 60228
- IEC 60332-3-24 Cat.C
ADDITIONAL INFORMATION
- Custom core/jacket color

Product structure

conductor	Class 5 Bare Copper Soft Conductors (IEC 60228 Class 5) Conductor resistance: ≤13.3Ω/km (20°C, 0.75mm²)
insulation	Flame retardant PVC composite (tested by IEC 60332-1-2) Insulation Thickness: 0.4mm (nominal) ±10%
color	Compliant with DIN 47100 full chromatography
structure	Twisted pair structure (pitch ratio ≤20×D) Concentric layered stranding (fill coefficient≥0.7)
Wrap the bag	Integral polyester strap wrap (thickness 0.08±0.01mm) Overlap rate≥ 25%
shield	Integral tinned copper braided shielding (coverage ≥85%) Weaving angle: 45±5°
Sheath material:	Flame retardant PVC sheath (oxygen index ≥32%) The thinnest point of the sheath ≥ nominal value × 80%+0.1mm
Sheath color	RAL 7001 Grey (ΔE≤3)

Technical parameters

Operating voltage	Conductor: ≤0.75mm²：300/500V ≥1.00mm²：450/750V Outer sheath: 450/750V (full section)
Test voltage	≤0.75mm²：2000V AC/5min ≥1.00mm²：2500V AC/5min
Temperature range	Operating temperature range ▸ Fixed laying: -25°C ~ +70°C ▸ Non-stressed temporary mobile laying: -5°C ~ +70°C Short-circuit tolerance limit ▸ Maximum instantaneous temperature: +160°C (duration ≤5 seconds)
environmental protection	Comply with EU RoHS directive

Cable parameters

numbering	specification	The finished outer diameter is -ø	Max. Resistance (20° C)
LS2380205	2 x 0.35 mm²	1.8X3.7 mm	247.0 ohm/km	Send an inquiry
LS2380305	2 x 0.5 mm²	2.1X4.2 mm	39.0 ohm/km	Send an inquiry
LS2380405	2 x 0.75 mm²	2.3X4.6 mm	26.0 ohm/km	Send an inquiry
LS2380505	2 x 1.0 mm²	2.4X4.8 mm	19.5 ohm/km	Send an inquiry
LS2380705	2 x 1.5 mm²	2.9X5.8 mm	13.3 ohm/km	Send an inquiry
LS2381205	2 x 2.5 mm²	3.3X6.6 mm	7.98 ohm/km	Send an inquiry