N07V-K 450/750V

Suitable for construction trade, industry, crafts, wiring and electric transportation. Installed within a pipe or pipe, visible or recessed or similar enclosed system. Suitable for static, protected use inside switches or control devices for AC up to 1000 V or DC up to 750 V to ground. The 1 mm2 section is only suitable for circuits of lifting equipment and machines. In fire risk installations, the maximum operating temperature must not be higher than 55°C. Not suitable for laying outdoors and underground.

apply

CE= products comply with the EU Low Voltage Directive 2014/35/EU

peculiarity

Customized splices, wiring harnesses, etc. are available
HD 21
CEI 20-22
CEI-UNEL 35752
CEI 20-52
IEC 332-3
Directive Low Voltage Directive 73/23/EEC and 93/68/EEC

Product structure

conductor	Fine bare copper strands comply with VDE-0295 Category 5 and IEC 60228 Strands 5 Special PVC R2 core insulation
insulation	Special PVC R2 core insulation

Technical parameters

Nominal voltage	450/750V
Test voltage	2500 V
Bending radius/min	Minimum bend radius 4.0 x diameter
Temperature range	Maximum operating temperature -10°C to +70º C Maximum short-circuit temperature +160º Celsius
Fire resistance	Flame retardant in accordance with IEC 60332.1 standard CEI EN 50265-2-1 CEI 20-22 II
Insulation resistance	20 MΩ x km
environmental protection	Comply with EU RoHS directive

Cable parameters

numbering	specification	Copper weight	Finished product weight
K7100 .. 25*	0,5 mm²	4,8 Kg/Km	8 Kg/Km	Send an inquiry
K7100 .. 34*	0,75 mm²	7,2 Kg/Km	12 Kg/Km	Send an inquiry
K7100 .. 50*	1,0 mm²	9,6 Kg/Km	14 Kg/Km	Send an inquiry